Gateways

Centralização de Informação dos processos em Sistemas de Dados

Gateways
Virtually all industrial installations are created by implementing a variety of incompatible protocols and isolated systems. The application requires that these objects exchange data. Components such as  gateways are required to seamlessly create these bridges. The gateways and converters that we offer are easy to integrate in your existing installation.
Aplicações para Todas as Indústrias
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

Acoplador Siemens DP/DP

Siemens DP/DP coupler

O acoplador DP / DP é um componente de escolha para estabelecer a comunicação entre 2 mestres DP de classe 1, que controlam a sua própria rede específica.

O resultado é uma mailbox com um máximo de 244 bytes de entrada e 244 bytes de saída. As redes podem ter diferentes baudrates e parâmetros de bus. Os endereços de bus de ambas as slaves podem ser configuradas por 2 switches DIP.

Especificações Técnicas

Gerais
Classe de isolamento: IP 20
Monitoramento do status de energia e barramento via LEDs

Especificações da fonte de alimentação
Tensão de operação: 24 V
Consumo atual: 150 mA

Especificações PROFIBUS
Conector: DB9
12 Mbps
Endereço do bus: switches DIP
Intercâmbio de dados: até 244 bytes de dados de entrada e saída
Isolamento galvânico entre as redes DP

vpgate-modbus-tcp

VPGate Modbus TCP / Modbus Serial

The VPGate MODBUS TCP to serial is a gateway that enables the exchange of data between a MODBUS TCP network and equipment with a serial link. Data can easily be visualized by the user via an integrated webpage. In addition to relevant diagnostic alarms, this ensures the optimal integration of equipment in your network.

The VPGate allows for effective diagnosis via the integrated webpage. Here the user can access maintenance information. The gateway has an integrated switch in addition to diagnostic LEDs on the front panel.

The VPGate is an economically attractive solution to enable integration in an existing network.

Especificações Técnicas

Main Side
Connection: 2 Port / RJ-45
Protocols: MODBUS TCP
Features: auto-negotiation / auto crossover / auto polarization
Operation mode: MODBUS Client / MODBUS Server / MODBUS Gateway
Speed: 10 / 100 Mbps
Configuration method: Standard MODBUS program, web interface
Device access: HTTP (integrated webpage), FTP, SNMP, v1
I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output

Serial side
Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
Protocols: MODBUS RTU or ASCII Server / Transparent
Operation mode: MODBUS master or slave / Transparent
Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
Data Exchange: 7 or 8 bits
Termination: Active for RS-485
Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
Function supported: Transparent mode: end of frame karakter, known length, on timeout

Mechanical and Electrical Specifications
Power supply: 12-30 VDC @ 1.7 W

Others
Dimensions: 120 x 100 x 23 mm
Operating temperature: 0 .. 55 °C
Weight: 130 g

Mais Informações

Código do Produto: 110-00013A.

VPGate Profibus DP / Modbus Serial

VPGate Profibus DP / Modbus Serial

The VPGate PROFIBUS DP to serial is a gateway/converter between PROFIBUS DP and serial/MODBUS. It enables a fast connection of any serial/MODBUS device to a PROFIBUS system at a low cost. It is designed for quick and easy integration. No additional software is needed as it can be easily configured via any PROFIBUS configuration management tool.

The VPGate is built into the system and no knowledge of coding is needed for configuration. The PROFIBUS configuration tool is easy to use by personnel.
On the PROFIBUS side it is a DP slave, and on the serial/MODBUS side master or slave. The parameters and behavior are configured simply through the GSD file in the configuration tool of the PROFIBUS master.
The VPGate is an economically attractive solution to enable integration in an existing network.

Especificações Técnicas

Main side
Connection: DB9 female connector
Protocols: PROFIBUS DP
Features: PROFIBUS DP (DP, V0, DP V1), sync, freeze, fail-safe
Operation mode: slave
Speed: 9.6 Kbps – 12 Mbps (auto detection)
Configuration method: GSD file via standardized configuration tool
Device access: Via PROFIBUS master
I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output

Serial side
Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
Protocols: MODBUS RTU or ASCII Server / Transparent
Operation mode: MODBUS master or slave / Transparent
Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
Data Exchange: 7 or 8 bits
Termination: Active for RS-485
Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
Function supported: Transparent end-of-frame: end of frame character, known length, on timeout

Mechanical and Electrical Specifications
Power supply: 10..30 VDC @ 1.5 W

Others
Dimensions: 120 x 100 x 23 mm
Operating temperature: 0 .. 55 °C
Weight: 130 g

Mais Informações

Código do Produto: 110-00011A.

VPGate Profinet / Modbus Serial

VPGate Profinet / Modbus Serial

VPGate PROFINET to serial is a PROFINET gateway that enables the exchange of real-time data between a PROFINET IO network and any equipment with a serial link. Data can easily be visualized by the user via an integrated webpage. In addition to relevant diagnostic alarms, this ensures the optimal integration of equipment in your network.

The VPGate allows for effective diagnosis via the integrated webpage. Here the user can access maintenance information. The gateway has an integrated switch in addition to diagnostic LEDs on the front panel.

The VPGate can easily be replaced during maintenance as no prior configuration is needed and all data is stored in the PROFINET IO.

This product is an economically attractive solution to enable integration in an existing network and is certified by PROFIBUS International.

Especificações Técnicas

Main side
Connection: 2 Port / RJ-45
Protocols: PROFINET
Features: auto-negotiation / auto crossover / auto polarization / MRP-client
Operation mode: IO-Device / MODBUS Server / MODBUS Gateway
Speed: 10 / 100 Mbps
Configuration method: GSD file via standardized configuration tool
Device access: HTTP (integrated webpage), FTP, SNMP, v1
I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output

Serial side
Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
Protocols: MODBUS RTU or ASCII Server / Transparent
Operation mode: MODBUS master or slave / Transparent
Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
Data Exchange: 7 or 8 bits
Termination: Active for RS-485
Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
Function supported: Transparent mode: end of frame character, known length, on timeout

Mechanical and Electrical Specifications
Power supply: 24 VDC @ 1.7 W

Others
Dimensions: 120 x 100 x 23 mm
Operating temperature: 0 .. 55 °C
Weight: 130 g

Mais Informações

Código do Produto: 110-00012A.

Mais informações? Contacte-nos:
email: info@industrialsys.pt | tel.: +351 967 161 605